This video should address most of the questions that I’ve been getting about the MOPA and I think you’ll be able to see when you watch it why I’ve been so excited about this and why so many folks have been taking note of this new machine.

Click here to see the MOPA Oscillator Video

Since it’s Memorial Day I figured why not do something special – so since I’m also happy there is now something to document and explain how the EnergyWand.com thing works (and what it does… the main site is frankly a bit vague on some areas for this remarkable product) I’m gonna go ahead and give one of these:

www.EnergeticSecrets.com/energywand

to the next person who orders a MOPA Oscillator.

This is not one of the copycat cheaper wands – this is the $300 wand that works the way it should and not just for water (like the www.Stirwand.com product which is a fine product for what it is). This is only for the first MOPA order that comes in but if you miss out and come in 2nd or 3rd and would like one for wholesale cost I’ll set you up.

So check out my new video of the MOPA Oscillator and if you’ve been on the fence now is a great time to take advantage of my Memorial Day special which may end up going until Tuesday or so because I was a bit late to get this out.

So here’s the video: MOPA Video

And here’s the thing you’ll get if you act quickly and get a MOPA:
www.EnergeticSecrets.com/energywand

The EnergyWand.com wand is something you can get on it’s own through me separately if you can’t do the MOPA thing right now – just use this link:
www.EnergyWand.com

I’m looking forward to hearing what you think of this new video so let me know. You can post your feelings on this here.

See last week I had the great idea to have a quick 20% off coupon on the www.Green8usa.com site to honor George Washington’s birthday but then our server was attacked (basic ‘denial of service’ which my admin had to deflect during the last half of last week!).

So the coupon was active but the site was down half the week – what a mess.

For some other reasons my websites on Royal Rife were very busy so there were a lot of people getting shut out of the sites. Frustrating to say the least.

Long story short – I’ve reactivated the 20% coupon code: green8prize

Check this out now so you’ll know what this is about: Click Here

The coupon discount will only be valid until Feb 28th Midnite PST.

On the site you’ll learn about a technology that was developed in Germany representing one of the most complete methods for ‘cleaning’ the electro-magnetic pollution from your home. It includes a device for ‘cleaning’ wireless radiation from wireless routers called the Transformer 22. Another specializes it’s ‘cleaning’ energy towards homes that are in close proximity to a cell/mobile phone antenna – it’s called the Transformer 28.

There’s also solutions that work for electronic appliances of all types (I recommend first ‘cleaning’ appliances with any wireless feature, seems to be just about everything!), the small, medium, and large Green 8’s can be installed depending on the size of the appliance. This is just a taste of the information covered on the website.

This idea of ‘cleaning’ the electro-magnetic fields and radiation is a new concept as far as the theoretic explanation of why these work. You see for years I’ve been sharing this technology and anyone at all electrosensitive can always feel the different. It’s often assumed that the Green 8 simply “blocks” the emf and radiation but that’s not what it does. It not the amount of emf/radiation that is changing it’s the quality of the emf and radiation that is changing.

Since the science is new – and we want to make sure you are very happy with your Green 8 / Transformer devices we back them with a newly extended 365 day satisfaction guarantee. Everything on the site* is 20% off when you use this coupon green8prize until midnite PST on Feb 28th.

Thanks for reading,
-Joshua

* sorry no wholesale discounts but we have opened up a new wholesale section on this website

Will this machine be a replacement frequency generator? Absolutely not. In fact you’ll see in the video that a frequency generator hooks right up to it so it can carry the frequencies from the generator.

Watch the video and I think you’ll get a better idea. Check it out here: Rife Ray Tube Instrument

PR: wait… I: wait… L: wait… LD: wait… I: wait… wait… Rank: wait… Traffic: wait… Price: wait… I: wait… L: wait… C: wait…

He’s does a lecture just about every year at Teslatech and it’s no wonder because his information is always top notch. For the last few years his presentation has been on Water Fuel technology and this year he did a great overview on this subject. If you have interest in or are involved in this type of research I highly recommend that you pick up the DVD of this presentation from Teslatech.info

One of the things that he covered was the research of a man named Patrick Kelly who has been freely distributing an ebook on this subject and sharing circuit diagrams and other research data to help make replication of this technology possible.

Keep in mind that this isn’t just about trying to get cars to run on water. I feel that this is possible and has been done but in order to advance this technology to the next level we must start by replicating a water-fuel processor which uses very low current and then scale this up once it is running consistently. In speaking to Moray privately he felt exactly the same about this. So keep this in mind if you get going on this topic.

I will update this post with links to related sites so check back.

Thanks for reading…
-Joshua

I’ve always liked Tai’s approach in that he’s all about what’s going on right now – this isn’t about the future.

I’ve had the opportunity to interview and get to know Tai and he’s the real deal. He has so much knowledge on alternative fuel technology and talking to him he just openly shares it so fast you need to take notes to keep up. His first choice of fuel is Compressed Natural Gas (CNG) which is becoming more and more available at filling stations and is used among commercial fleets as well due mainly to the cost. The cost does vary quite a bit depending on the filling station and how close they are to the source of the CNG but in Salt Lake it costs as little as about $15 to take Tai’s Toyota Tacoma 500 miles!

CNG is also one of the cleanest fuels available delivering exhaust that is often cleaner than the ambient city air.

Unfortunately there is a lot of confusion about what is involved in converting a vehicle to run on CNG – there’s a lot involved that must be done in order to make it a safe vehicle but as long as the proper parts and procedures are followed CNG can be even safer that running a vehicle on gasoline. Due to the high cost of the tanks and other high pressure parts which are properly certified (there are some undue regulations that must be followed to keep these conversions legal) a conversion will usually cost at least $10,000 – but once completed the fuel costs more than make up for such an investment. Please be careful of scams that sell conversion kits for $1000 as these are always missing expensive parts and often lead people to unsafe self-installs – not worth wasting your time with. If you want to do it right – talk to Tai and he will give you real-world information – just don’t bother ordering one of those cool shirts on his website because he’s out of them and his webmaster hasn’t been helpful to remove them yet… (cool shirts though – hopefully he will make more

You can learn about Tai’s CNG conversions as well as his work with Hydrogen fuel conversions and multi-fuel ethanol and biodiesel options by visiting his Natural Gas Conversion website at IntergalacticHydrogen.com – I’ve got an interview planned with Tai which I’ll post here once it’s edited…

Thanks for reading!
-Joshua

The Bemer 3000 is still only available in the US for fitness and wellness use while steps are being taken to expand it’s availability here for other purposes. Here in Eugene, Oregon there will be some Olympic trials where I’ll be planning to get the Bemer used by athletes for improved performance.

Why is now a good time to get started with the Bemer 3000?

After seeing what I did along with the other approx. 400 attendees at the convention I can say there are a lot of reasons to get involved with this powerful, yet incredibly non-invasive technology.

We saw fantastic new footage from the Institute of Microcirculation in Berlin which was presented by Dr. Klopp. The German doctor presented numerous video clips showing before, during and after micro images of microcirculation in real time. The images showed blood which appeared rather stagnant so we could see the influence of the Bemer 3000 in just minutes of time. It was quite spectacular and I was lucky enough to be filming the event for BemerUSA.

I don’t know the final plan for this film footage but I hope to be contracted to edit this footage into some sort of distributable format (DVD most likely). Any encouragement that you feel like giving BemerUSA to give me this contract would be greatly appreciated.

So why get involved with Bemer 3000 now?

The one reason that I want to point out right now is that if you join my team now and become a Bemer distributor before the end of the month you will have a very significant advantage.

After May 1st BemerUSA has a policy change that required the first 8 units sold to be commissioned at 17% before the commission goes up to 25%. If you join now you’ll be ‘grandfathered’ into the old structure which means only 5 units will be at 17% before your commission goes up to 25%.

Signing up is simple:

1. Download the Bemer Application by clicking here

2. Fill it out and be sure to include my info as your referrer (Joshua Korn US00020) fax it to BemerUSA by 5pm EST April 30th at 1-407-628-0503

3. Call me to confirm especially if you happen to fax your form in after 5pm EST so I can help secure your spot as only requiring 5 units to get to 25% commission.

Note: You don’t have to purchase 5 units by April 30th!!! You just have to signup to become a "Bemer Partner" by April 30th to qualify which does require a one time fee of $190 and this gets you your own (soon to be vastly upgraded) homepage that can help you promote the Bemer technology. You can see my website (and even avoid faxing this application if you prefer to do it online – look for "Sign Up") at www.bemeramerica.com/future

More updates on the convention and the video which I shot there coming soon.

-Joshua